EGO Power+ Impact Driver
EGO owners love their 56V mowers and blowers, so it is natural to look for an EGO impact driver to share the batteries. Here is what EGO actually sells in the US and the smartest way to add an impact driver.
We research tools from manufacturer specs and long-term owner feedback. If you buy through our Amazon links we may earn a commission at no extra cost to you. How we make money.
EGO does not list an impact driver on its US website. When we checked egopowerplus.com, its product categories covered mowers, blowers, trimmers, chainsaws, snow blowers, the Multi-Head System and portable power, but no drills or impact drivers. For EGO owners, the best move is a separate 18V or 20V platform such as Ryobi, DeWalt or Milwaukee. Avoid adapters that put 56V packs on handheld tools.
On this page
- Is there an EGO impact driver?
- Why a 56V platform is a poor fit for an impact driver anyway
- Your options as an EGO owner
- How much impact driver does a typical EGO owner need?
- Recommended impact drivers for EGO owners
- What about Greenworks and other yard brands?
- Buying tips if you are adding a second platform
- FAQ
Is there an EGO impact driver?
Not in the US lineup we could find. EGO Power+ is an outdoor power equipment brand. When we checked egopowerplus.com, the product menu listed mowers, riding mowers, blowers, string trimmers, hedge trimmers, chainsaws, pole saws, snow blowers, the Multi-Head System, portable power, batteries, accessories and lifestyle products. There was no drill, impact driver or other building-tool category.
Lineups change, so check the current listing on EGO's site if you are reading this later. This page is based on EGO's published product range and general platform knowledge. We did not test any tools for it. The practical question for EGO owners is not "which EGO impact driver" but "what should I buy instead, given that my batteries will not carry over?"
Why a 56V platform is a poor fit for an impact driver anyway
Even if a 56V impact driver existed, it would be an awkward tool. Impact drivers are handheld, often used overhead or at arm's length, and prized for being short and light. Three factors work against high-voltage packs:
- Weight and bulk. EGO's 56V packs are sized for mowers, blowers and snow blowers. Even the smaller ones are larger and heavier than a typical 2.0 Ah 18V pack, and that weight sits under your hand all day.
- No real benefit. An 18V-class driver already delivers 1,500 to 2,200 in-lbs of rated torque. More voltage does not help you drive a 3-inch deck screw any better.
- Balance. A large pack under a compact driver head makes the tool top-light and tiring to hold.
The same logic applies to 40V and 60V yard platforms from other brands. Makita's 40V XGT is the main exception, and it is a pro building-tool platform, not a yard system. Even there, Makita's 40V impact driver weighs more than its 18V equivalent, which is why most pros still reach for 18V drivers for everyday fastening.
Your options as an EGO owner
| Option | Good for | Downside |
|---|---|---|
| Ryobi ONE+ 18V | One battery for a huge range of yard and shop tools | You end up with two yard platforms if you add Ryobi yard tools |
| DeWalt 20V MAX, Milwaukee M18, Makita LXT | Serious building and renovation work | Higher cost; yard tools are a secondary focus |
| Skil PWRCore 20 | Budget DIY; made by EGO's parent company | Batteries still do not interchange with EGO |
| Greenworks 24V | Cheap DIY driver if you also want small yard tools | Duplicates what your EGO tools already do |
| Third-party 56V-to-18V adapter | Nothing we would recommend | Safety, weight and warranty risks |
For most EGO owners, the cleanest answer is a separate building-tool platform chosen on its own merits. Your EGO batteries stay in the yard tools, and the new 18V batteries stay in the shop. Our guide to choosing a cordless tool platform walks through that decision.
How much impact driver does a typical EGO owner need?
Most people who own EGO yard tools are homeowners with a yard to maintain, a fence to repair and the odd deck board to replace. That points to a mid-range 18V-class driver, not the most powerful tool on the shelf. Use the jobs you actually do to set the budget:
| Your typical jobs | What to buy |
|---|---|
| Furniture, shelves, curtain rods, small repairs | A 12V driver or a compact 18V driver with a low speed setting |
| Fence pickets, deck board repairs, garden beds | A brushless 18V/20V driver with three speeds |
| Building a deck, shed or pergola | A brushless 18V/20V driver plus 4.0 Ah packs and a second battery |
| Lag screws for ledgers and posts | A top-tier 18V driver, or an impact wrench for larger lags |
If you are unsure about voltage class, our 12V vs 18V impact driver comparison explains the trade-off. If you were hoping to reuse your EGO packs through an adapter, read our notes on cordless tool battery adapters first; the risks rise sharply when the voltage does not match.
Recommended impact drivers for EGO owners
Ryobi ONE+ HP Brushless 4-Mode Impact Driver (PBLID02)
Best for: homeowners who want a big tool range at moderate prices.
- Torque
- 2,200 in-lbs
- Speed
- 850/2,000/2,900 RPM + assist
- Impacts
- 4,000 IPM
- Weight
- 2.3 lb bare
Ryobi's ONE+ range covers almost every DIY tool, and this driver adds an assist mode for small screws. It carries Ryobi's 3-year warranty.
Strengths
- Huge ONE+ tool range
- Assist mode for control
Weaknesses
- 5.5 in long; not the most compact
- Sold mainly through Home Depot
DeWalt 20V MAX XR Impact Driver (DCF887)
Best for: renovation, decks and frequent building projects.
- Torque
- 1,825 in-lbs
- Speed
- 1,000/2,800/3,250 RPM
- Impacts
- 3,600 IPM
- Weight
- 2.1 lb bare
A proven three-speed driver on one of the broadest platforms, sold almost everywhere.
Strengths
- Huge platform, easy to find batteries
- 3-year limited warranty plus 1 year free service
Weaknesses
- No self-tapping or assist mode
- Costs more than Ryobi or Skil
Torque ratings are measured differently by each brand, so compare classes rather than exact numbers.
What about Greenworks and other yard brands?
Greenworks is the main yard-first brand that does sell an impact driver in the US, on its 24V platform. If you were choosing a yard system from scratch and wanted a driver on the same battery, Greenworks 24V would be on the list. As an existing EGO owner, though, buying Greenworks just for the driver gives you a second yard platform you do not need. Details in our Greenworks impact driver guide.
Buying tips if you are adding a second platform
- Buy a kit for your first tool. A drill and impact driver combo usually includes two batteries and a charger for little more than the drill alone. See the best drill and impact driver combo kits.
- Keep the batteries small. 2.0 Ah packs keep an impact driver light. You do not need mower-sized capacity. Add one 4.0 Ah pack later if you take on a deck or fence project.
- Store packs by platform. Label shelves for EGO and the new brand, and follow the same storage rules for both: cool, dry and partly charged for long breaks.
Safety: do not modify batteries or use unverified adapters to run tools on the wrong voltage. Wear eye protection when driving fasteners, and finish lug nuts and structural bolts with a torque wrench.
Verdict
There is no EGO impact driver in EGO's current US lineup, and a 56V pack would make a poor handheld driver anyway. Keep your EGO batteries for the yard and pick a separate 18V or 20V platform for building tools: Ryobi for range and value, DeWalt or Milwaukee for heavier work. Skip battery adapters.
Frequently asked questions
Does EGO make a drill or impact driver?
Not in EGO's current US lineup, based on the product categories listed on egopowerplus.com when we checked. EGO focuses on outdoor power equipment. If you see a listing for an EGO impact driver, check carefully that it is a genuine EGO product and not a third-party adapter or mislabeled item.
Can I use an EGO 56V battery on an impact driver with an adapter?
We do not recommend it. Third-party adapters that put 56V packs on 18V tools rely on electronics you cannot verify, can bypass the tool's protection features and will void warranties. A handheld driver with a large 56V pack is also heavy and unbalanced. A separate 18V battery is safer and cheaper long term.
Which company owns EGO?
EGO is owned by Chervon, which also owns Skil and Flex. The three brands use different battery systems, so EGO 56V packs do not fit Skil PWRCore 20 or Flex 24V tools.
What is the best impact driver for an EGO owner?
Any good 18V or 20V driver on a platform you will use for other tools. If you want one battery for yard and shop, Ryobi ONE+ is the most complete alternative. If you only need building tools, DeWalt, Milwaukee or Makita are strong choices. Skil is a budget option from EGO's parent company.